Skip to main content

Wi-Fi, Ethernet module for led control

This is a 4 layer board that I designed using the pic32mx795f512l and the marvell 88w8686 Wi-Fi chip. It includes an Ethernet controller and spi output to control LEDS strips.












This is a video of the controller, controlling 5 sets of 64 RGB leds.

Comments

  1. JimyApril 30, 2017 at 6:26 AM

    Good post, loved it. Like the way you used LEDs here. Thank you for sharing it with us and keep posting such posts

    ReplyDelete
  2. moeezJuly 28, 2017 at 10:02 PM

    This is my first time visit to your blog and I am very interested in the articles that you serve. Provide enough knowledge for me. Thank you for sharing useful and don't forget, keep sharing useful info


    Hire LED robots for wedding reception 

    ReplyDelete
  3. simfrontNovember 23, 2020 at 10:23 PM

    I simply wanted to write down a quick word to say thanks to you for those wonderful tips and hints you are showing on this site. Modelling & Simulation

    ReplyDelete

Post a Comment

Popular posts from this blog

Tutorial to assemble the passing butter robot from Rick and Morty

I hope this tutorial helps everyone assemble their passing butter robot, it would be constantly updated base on your feedback is a work in progress . so lets get started. Shopping list: Parts: 1.  RC Tank ISPY Wifi Controlled Spy With Wi-Fi 2. Towerpro SG90S Micro 3. Rubber band(is for counter weight) 4. M3 flat head screw 5. 3D printed parts http://www.thingiverse.com/thing:1878565 6. (2) 30mm wires 1 red and 1 yellow Tools: 1. soldring iron 2 glue gun 3 screw driver Taking  things apart, after removing the cover unsolder those 2 wires, we are going to connect those 2 wires to the micro servo later on. We need to remove the camera is a a bit tricky if you don't want to break anything after removing the gear box, remove this pin first. Now we need to take apart the servo motor, we would cut all the wires from the servo motor and solder the 2 wires remove from the other motor before.  after that, assemble back the servo motor and it s
9 comments
Read more

3D printed pass the butter robot from Rick and Morty

This is a 3d printed version of one of my favorite TV show, I will post the solidworks and STL files and information how to assemble one of this this is just a test run, the base is from a "I-spy Mini Wireless Wifi App-control Spy Tank Rc Car"
5 comments
Read more

Pick up table tennis ball robot

Pick up table tennis ball robot      This robot is designed to pick up table tennis balls and it is not a kit. I completely designed and built it for a friend who plays table tennis. The front side of the robot has an opening in the corner of the concave angle formed by the two sides. There is a rotational door in this opening, which is activated by a couple of sensors located on top of the door. When the sensors receive a signal about an object e.g. like a table tennis ball, the signal is transmitted to a servo engine which turns the rotational door in 360 degrees hitting the object inside the robot as shown in image 3 and 4. The Robot can be operated in two ways; 1) By using a remote control, which permits the user to increase or decrease the speed of the lateral wheels. 2) By activation with a chip located inside the robot, which allows the robot to move independently and in a randomly. Either way, independent movement or remote controlled movement, the robot will
5 comments
Read more