Skip to main content

16x16 Led Panels

16x16 Led Panels connected together

 
This is a set of 2 matrix led panels that is controlled with a Pic32 and an Ethernet module. Each panel has its own IP, and from the windows application you can select the location of the panel to form an array of panels and to display whatever is on your desktop into the panel.

 16x16 Led Panel

 

This is the single version of the led panel.  

Settings for the program

 Here you can see the settings for the program of how easy it is to comunicates with the panels.






Comments

  1. Thanks for sharing the video for clarity. The display looks unusual. More for a person interested in computer work. A graphic designer would make the most out of it.

    ReplyDelete

Post a Comment

Popular posts from this blog

Tutorial to assemble the passing butter robot from Rick and Morty

I hope this tutorial helps everyone assemble their passing butter robot, it would be constantly updated base on your feedback is a work in progress . so lets get started. Shopping list: Parts: 1.  RC Tank ISPY Wifi Controlled Spy With Wi-Fi 2. Towerpro SG90S Micro 3. Rubber band(is for counter weight) 4. M3 flat head screw 5. 3D printed parts http://www.thingiverse.com/thing:1878565 6. (2) 30mm wires 1 red and 1 yellow Tools: 1. soldring iron 2 glue gun 3 screw driver Taking  things apart, after removing the cover unsolder those 2 wires, we are going to connect those 2 wires to the micro servo later on. We need to remove the camera is a a bit tricky if you don't want to break anything after removing the gear box, remove this pin first. Now we need to take apart the servo motor, we would cut all the wires from the servo motor and solder the 2 wires remove from the other motor before.  after that, assemble back the servo...

3D printed pass the butter robot from Rick and Morty

This is a 3d printed version of one of my favorite TV show, I will post the solidworks and STL files and information how to assemble one of this this is just a test run, the base is from a "I-spy Mini Wireless Wifi App-control Spy Tank Rc Car"

Wi-Fi, Ethernet module for led control

This is a 4 layer board that I designed using the pic32mx795f512l and the marvell 88w8686 Wi-Fi chip. It includes an Ethernet controller and spi output to control LEDS strips. This is a video of the controller, controlling 5 sets of 64 RGB leds.